Project Overview
Securefence delivered high-security palisade fencing and associated concrete civils for a substation compound within an operational solar farm in the East of England.
The scope included 190 metres of 2.4m palisade fencing installed to the distribution network operator’s specification, together with a reinforced concrete anti-burrow beam along the full perimeter.
The Requirement
As part of the electricity distribution infrastructure, the substation perimeter had to meet the network operator’s published specification rather than a general commercial fencing standard. This governed the fence type, height, fixings and below-ground construction.
The specification also required an anti-burrow beam: a continuous concrete sill beneath the fence line designed to prevent animals or intruders from passing underneath.
This made the project as much a civil engineering exercise as a fencing installation. The beam required reinforcement, expansion joints, accurate setting out and a controlled concrete pour, all completed to the operator’s specification.
The Securefence Solution
Securefence installed 190 metres of 2.4m steel palisade fencing, together with the compound gates and specified fixings.
A reinforced anti-burrow beam was formed and poured along the full perimeter, with the reinforcement and expansion joints detailed and positioned in accordance with the specification.
Delivering the fencing and concrete works under a single contract reduced the interfaces the client needed to manage. It also enabled the two elements to be closely coordinated where tolerances were tight and precise installation was essential.
Securefence worked to the network operator’s inspection requirements throughout, documenting the installation as required for final sign-off.
Project Challenges
The principal challenge was the limited working space. Securefence was operating within a confined compound alongside other contractors on an operational solar farm, making access, deliveries and sequencing daily considerations.
Buried services also ran through the working area. Every post position and the complete line of the concrete beam had to be set out around them. This required particular care because the fence alignment was governed by the specification and offered little scope for adjustment.
The Result
Securefence delivered 190 metres of specification-compliant palisade fencing and a continuous reinforced concrete anti-burrow beam, providing a secure perimeter for the substation compound.
The fencing and civils were completed as one coordinated package, giving the client a single point of responsibility and removing the need to manage separate trades.
Project Facts
- Location: East of England, site not named
- Sector: Electricity distribution, substation within a solar farm
- Fencing type: Steel palisade to network operator specification
- Height: 2.4m
- Length installed: 190m
- Civils: Reinforced concrete anti-burrow beam around the full perimeter