Substation and BESS Fencing Contractors, Built to the Operator's Specification

A substation compound is national infrastructure, and the network operator’s specification decides the fence, the height, the fixings and what goes in the ground beneath it. Securefence Ltd installs high security palisade and LPS 1175 rated compound fencing for substations and battery energy storage sites across the UK, with the anti-burrow beams, gates and compound civils delivered by the same team under one contract.

What’s at stake

The Substation and BESS Fencing Challenge

Substation and battery storage compounds are unforgiving. The specification is fixed, the site is usually live, and the fence is inspected before anyone signs it off.

The specification is not open to interpretation

Distribution network operators publish their own standards for compound fencing. Fence type, height, fixings, gates and the below-ground detail are all set, and a general commercial specification will not pass inspection.

It is a civils job as much as a fencing one

The anti-burrow beam beneath the fence line is reinforced concrete, poured to specification with expansion joints and a controlled pour. Split the fencing and the concrete between two contractors and you have created an interface on the one job where the line cannot move.

Tight compounds on live sites

Substation and BESS compounds sit inside operational solar farms and energy sites, alongside other contractors, with buried cabling through the working area and a confined footprint for deliveries and plant.

Security and insurance expectations are rising

Battery storage sites hold high value plant, and insurers and planning authorities increasingly expect compound fencing certified to LPS 1175 Issue 8, not just a palisade fence that looks the part.

Get the compound right and the operator signs it off first time. Get it wrong and the fence comes out, the beam comes out, and the programme goes with it.

What we deliver

Our Substation and BESS Fencing Services

Everything a substation or battery storage compound needs at the perimeter, from the concrete in the ground to the gate in the fence, delivered to the operator's specification.

Substation Palisade Fencing

High security steel palisade fencing installed to the distribution network operator's published specification, typically 2.4m with the pales, rails, fixings and anti-climb detail the standard calls for. Documented throughout for the operator's inspection and sign off.

Green acoustic fence panels lining a gravel compound at a battery storage site

BESS Compound Fencing

Security-rated compound enclosures for battery energy storage sites, in LPS 1175 rated welded mesh or steel palisade to suit the insurer, the planning condition and the client’s own standard. Anti-climb features, appropriate gates and integration with the wider site perimeter.

Anti-burrow Beams and Compound Civils

The continuous reinforced concrete sill cast beneath the fence line to stop burrowing animals and intruders getting under it. Rebar, expansion joints and a controlled pour to the operator's specification, formed and poured by our own team so there is no interface between the concrete and the fence that sits on it.

 

Compound Gates and Access

Manual and automated compound gates rated to match the fence line they sit in, positioned for operational access and maintenance vehicles, and fitted with the locking arrangement the operator requires.

Acoustic Barriers for BESS and Substations

Battery storage runs continuously and generates continuous noise. Where houses sit close to the site, we install reflective acoustic barriers up to 4m, integrated with the compound perimeter. See our acoustic fencing page for the full detail.

Why clients choose us

Why Choose Securefence for Substation and BESS Fencing?

Compound fencing on the electricity network is delivered to a standard, inspected against it, and signed off or rejected. Here is what we bring.

Built to the operator's specification

Palisade, gates, fixings and anti-burrow beams to the published standard, documented for inspection and sign off.

Fencing and civils under one contract

The concrete beam and the fence on top of it from the same team, with no trade interface for you to manage.

Live site experience

Substation and BESS compounds inside operational solar farms and energy sites, delivered around other contractors and buried services.

Proven on national infrastructure

Security-rated fencing delivered to exacting specification on programmes including HS2.

CPCS-certified plant operators and full RAMS

The right tickets for the machinery, and safety documentation that meets the standards of principal contractors and network operators.

Constructionline Gold accredited

Pre-qualification ready for developer, EPC and utility procurement frameworks.

The result is a contractor you can brief once, trust throughout, and hold to account on every detail.

ACCREDITATIONS & ASSURANCE
Our work

Substation and BESS Project Experience

Securefence delivers substation and battery storage compound fencing across the UK, for developers, EPC contractors and principal contractors, on new build and retrofit scopes.

 

Substation and BESS Compound Fencing, East of England

190m of palisade to network operator specification with a full-perimeter anti-burrow beam, fencing and civils in one package.

Steel palisade substation fencing around a compound in the East of England

FAQs

Here are the questions clients ask most often about substation and BESS compound fencing.

Q: What fencing does a substation need?

A: Whatever the distribution network operator's specification says. That usually means high security steel palisade at around 2.4m with specified pales, fixings and gates, and a reinforced concrete anti-burrow beam beneath the fence line. We install to the published standard and document the works for the operator's inspection.

Q: What is an anti-burrow beam?

A: A continuous reinforced concrete sill cast beneath the fence to stop burrowing animals and intruders getting under it. Network operators specify it for substation and BESS compounds, with the reinforcement, expansion joints and pour set out in their standard. We form and pour it ourselves as part of the fencing.

Q: Does a BESS compound need LPS 1175 rated fencing?

A: Increasingly, yes. Insurers and planning authorities are asking for compound fencing certified to LPS 1175 Issue 8. We install LPS 1175 rated welded mesh and palisade and will advise on the rating your insurer and site actually need.

Q: Can you work inside a live solar farm or operational site?

A: Yes. Most of our substation and BESS work is on operational energy sites, in a confined compound footprint, alongside other contractors and around buried cabling. Sequencing, deliveries and access are agreed with the site team before we start.

Q: Can you deliver the acoustic barrier and the civils as well as the fence?

A: Yes. Acoustic barriers, anti-burrow beams, foundations and compound civils can all sit in the same contract as the fencing, so there is one team and one point of accountability on the compound.

We also deliver

Explore Our Other Sectors

Ready to Discuss Your Substation or BESS Compound?

Working to a network operator's specification, or securing a battery storage site for a developer or insurer? Our team will read the standard, scope the compound properly and deliver the fence, the beam and the gates to programme.